VOLT® LED Strip Lights - Kit | Dry Use - RGB - High Output - 20ft
24V RGB Tape Light for Dry Locations
- Complete Kit
- Commercial Grade Adhesive Back
- Includes RGB Remote
- Lifetime Warranty
- Product Code
LED Strip Lights - Kit | Dry Use - RGB - High Output - 20ft
This kit includes everything you need to for your strip lighting install. The strip is flexible with self-adhesive backing that allows for easy installations into either straight runs or curved surfaces. The 20ft strip light provided in this kit can be cut to achieve a customized fit. The closely spaced LED's minimize hot spots in shallow applications and provides a uniform level of brightness along the entire length of the strip light. The included RGB controller and remote give you the freedom to create your desired effect. Lifetime Warranty.
- (1) 20ft reel of high output dry tape
- (1) 90W power supply
- (1) RGB controller
- (1) Power feed cable
- Lifetime Warranty
LED STRIP LIGHT SPECIFICATIONS
- Construction: Flexible PCB with 3M/VHB professional grade adhesive backing for an easy peel-and-stick installation
- Light Source: 6 LED’s per 4” section
- LED Beam Angle: 120°
- LED Chip Spacing: 0.66” (16.67mm) center to center
- Field Cuttable: Every 4 inches (at marked cut points)
- Operating Voltage: 24V DC (constant voltage)
- Color: RGB
- Power Consumption: 4 Watts/Foot
- Lumens/Foot: 112 Lumens/Foot
- Efficacy (LPW): 33 LPW
- Lifetime (L70): 50,000 hours
- Operating Temperature: -10°C to +50°C (-30°F to +120°F)
- Maximum Run Length: 20 feet
- Powered by: Remote electronic or magnetic Class 2 Transformer (120V AC 50/60Hz input to 24V DC output)
- Flexible PCB with 3M/VHB professional grade adhesive backing for an easy peel-and-stick installation
- Every 4 inches (at marked cut points)
- 6 LED’s per 4” section
- 0.66” (16.67mm) center to center
- 112 Lumens/Foot
- 33 LPW
- 24V DC (constant voltage)
- 3.4 Watts/Foot
- -10°C to +50°C (14°F to +122°F)
- Remote electronic or magnetic Class 2 Transformer (120V AC 50/60Hz input to 24V DC output
- UL & cUL Listed
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 1 customer
Displaying review 1
Comments about LED Strip Lights - Kit | Dry Use - RGB - High Output - 20ft:
Used this kit to light up a float in our local parade. These things are bright! Most units I found were 16.5 feet or 5 meters long. we needed 24 feet to go around our float.
They lit up a good 2-3 ft. and glowed 10 to 15 ft off a wall. Wanted to reuse them later so used 3M double sided tape to attach to float.
Please look into supplying a different controller as I really wanted to "pulse" the red and orange colors we used on each of the two strips.
You can view the float at:
to watch the Faith Community Parade video.
Shipping was quick too. Paid extra to get it quicker (3 day). Shipped from Nevada. Probably didn't need to spend the extra. Thought it was coming out of Florida.
Overall very happy. Would do it again!