VOLT® LED Panel Light | 2' x 4' 4000k
Energy-saving LED Flat Panels to replace fluorescent fixtures - 2' x 4' - cool white (4000K).
- Easy drop-in installation
- Dimmable LED flat panel
- Mercury Free
- 60 watts (actual power consumption)
- 6000 Lumens
- Cool White (4000k)
- Lifetime Warranty
- Product Code
LED Panel Light | 2' x 4' 4000k
VOLT® Edge Lit LED Panel Light luminaries replace fluorescent troffer fixtures in both new construction and retrofit applications. The edge-lit design gives it a slim profile while the white polycarbonate lens reduces glare and provides uniform light distribution, with no hotspots or pixelation.
Installation is simple and fast with mounting hardware included. Pendant hanging kit is also available. When used with a dimmer, the light output can be customized to the user.
Available in 3000K and 4000K, the Edge-Lit Flat Panel is suitable for indoor use only. It has no warm-up time (instant-on) with full light output and consistent luminaire-to-luminaire color. The low heat generation of the luminaire helps reduce HVAC costs. With no UV or infrared radiation, the product is dimmable down to 5% with compatible 0-10 volt dimmer.
LED Flat Panel Specifications
- Construction: Aluminum frame (painted white) with a white polystyrene lens
- Light Source: LED’s that are integrated into the aluminum frame
- Operating Voltage: 100/277V input
- Color Temperature: 3000K or 4000K
- CRI: 80+
- Power Consumption:
2’x2’ = 36W
2’x4’ = 60W
2’x2’ = 3300
2’x4’ = 6000
- Efficacy (LPW):
2’x2’ = 91
2’x4’ = 100
- Lifetime (L70): 50,000 hours
- Operating Temperature: -10°C to +50°C (-30°F to +120°F)
- Powered by: Meanwell LPF-60D-30 (2’x2’ panels) and LPF-60D-42 (2’x4’ panels)
- 36 Watts
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 1 customer
Displaying review 1
Comments about VOLT® LED Panel Light | 2' x 4' 4000k:
Review terse - 1000 char limit.
More light than 4 (4 foot) florescent tubes.
No height info when using the mounting frame. Answer: 2 + 5/8ths inches. Panel is 1/2 inch; power supply mounted on back is 9 x 3.5 x 1.75 inches and not centered (9 inch parallel to 4 foot - 10 inch in; 3.5 inch parallel to 2 foot - 7.5 inch in; looking at 2 foot side, light facing down, supply is left of the center). Called twice, both reps supposedly measured the mounting frame - both were wrong.
Light claims to be "dimmable" but only with compatible dimmers which are not listed anywhere. Standard residential dimmers will not work. Still have not found a dimmer to replace existing three way switches that will work. Dimmer must provide separate set of "control" wires. Supposedly RF controlled dimmers exist (have not been able to find any for "retail" purchase). I called customer service has not been able to list any compatible dimmers.