VOLT® LED Strip Lights - Kit | Damp Use - White - High Output - 20ft
24V White Tape Light for Damp Locations
- Complete Kit
- Warm (2700k) or Cool (4000k) white
- Commercial Grade Adhesive Back
- Includes Dimmer
- Lifetime Warranty
- Product Code
- BDL-VTL-HM-20-KIT
LED Strip Lights - Kit | Damp Use - White - High Output - 20ft
This kit includes everything you need to for your strip lighting install. The strip is flexible with self-adhesive backing that allows for easy installations into either straight runs or curved surfaces. This strip is rated for indoor damp locations (such as kitchens and bathrooms) and are encapsulated in a clear silicone coating that will not discolor over time. The closely spaced LED's minimize hot spots in shallow applications and provides a uniform level of brightness along the entire length of the strip light. Product ships with a water-tight connector. Sections may be connected together, however, once cut, the this strip light must be capped with an end-cap filled with silicone. Excess tape cannot be reused. The included VOLT dimmer gives you the freedom to create your desired dimming effect. Lifetime Warranty.
COMPLETE KIT
- Warm White (2700K) or Cool White (4000K)
- (1) 20ft reel of high output damp tape
- (1) 90W power supply
- (1) dimmer
- (1) power feed cable
- Lifetime Warranty
LED STRIP LIGHT SPECIFICATIONS
- Construction: Flexible PCB with 3M/VHB professional grade adhesive backing for an easy peel-and-stick installation
- Light Source: 6 LED’s per 4” section
- LED Beam Angle: 120°
- LED Chip Spacing: 0.66” (16.67mm) center to center
- Field Cuttable: Every 4 inches (at marked cut points)
- Operating Voltage: 24V DC (constant voltage)
- Color Temperature: 2700K or 4000K
- CRI: 80+
- Power Consumption:
SD = 1.45 Watts/Foot
HD = 4 Watts/Foot - Lumens/Foot:
SD (2700K) = 100 Lumens/Foot
SD (4000K) = 110 Lumens/Foot
HD (2700K) = 180 Lumens/Foot
HD (4000K) = 205 Lumens/Foot - Efficacy (LPW):
SD (2700K) = 69 LPW
SD (4000K) = 76 LPW
HD (2700K) = 45 LPW
HD (4000K) = 52 LPW - Lifetime (L70): 50,000 hours
- Operating Temperature: -10°C to +50°C (-30°F to +120°F)
- Maximum Run Length: SD = 32.8 feet (two - 16.4 foot reels)
HD = 20 feet - Powered by: Remote electronic or magnetic Class 2 Transformer (120V AC 50/60Hz input to 24V DC output)
Materials
- Flexible PCB with 3M/VHB professional grade adhesive backing for an easy peel-and-stick installation
- Every 4 inches (at marked cut points)
Photometrics
- 6 LED’s per 4” section
- 120°
- 0.66” (16.67mm) center to center
- 2700K or 4000K
- SD (2700K) = 100 Lumens/Foot
SD (4000K) = 110 Lumens/Foot
HD (2700K) = 180 Lumens/Foot
HD (4000K) = 205 Lumens/Foot - SD (2700K) = 69 LPW
SD (4000K) = 76 LPW
HD (2700K) = 45 LPW
HD (4000K) = 52 LPW
Electrical
- 24V DC (constant voltage)
- SD = 1.45 Watts/Foot
HD = 4 Watts/Foot - -10°C to +50°C (14°F to +122°F)
- Remote electronic or magnetic Class 2 Transformer (120V AC 50/60Hz input to 24V DC output
Certifications
- UL & cUL Listed
- Lifetime