VOLT® MR16 Multi-Beam Diffusion Filters with Clip & LED MR16 Lamp
- Includes (1) VOLT® LED MR16 Lamp
- Three diffusion filters with a progression of beam angles
- Micro-Lenses minimize light loss
- Two sides result in source-hiding or angle-spreading modes
- Sturdy clip attaches to MR16 lamp
- Product Code
Multi-Beam Filters Kit with LED MR16 Lamp | Low Voltage Landscape Lighting
A VOLT® Single Source MR16 Lamp (15º) with diffusion kit for 6 additional beam angles.
A Landscape Lighting Innovation, Designed & Engineered Exclusively by VOLT™
Like buying 7 lamps in one! One of the challenges of landscape lighting design is to predict the optimal beam angle before the fixture is installed. For this reason, many designers bring extra lamps to the job site - an expensive and hard-to-manage practice. Instead, bring this 15º LED lamp and the Multi-Beam Diffusion kit - change the beam angle without replacing the lamp.
New Micro-Lens Technology! Ordinary diffusion filters are highly inefficient because they scatter light in all directions. This new diffusion material is constructed with micro-lenses embedded in a clear material. The result is highly controlled diffusion with a minimal loss of light intensity.
Two Effects. Another feature of these filters is that they can be used in two orientations - with the microstructure (rough side) towards the lamp, or the microstructure facing away from the lamp. The former of these orientations is called the "Lamp Hiding Mode" the latter is the "Angle-Spreading" mode. The appearance of the two modes is slightly different and results in different beam angles.
Resulting Diffusion Angle Printed on Filter. When you start with this 15º LED Single Source MR16 lamp, the filters display an accurate prediction of the resulting beam angle. You will find this information printed along the edge of each filter (on both sides).
Start with any MR16 Lamp. The filters can be used with lamps of any beam angle. And, the resulting beam angle changes according to that. To find the resulting beam angles for any MR16 lamp, refer to the following chart.
The sturdy filter clip attaches directly to the lamp to hold the filter in place.
- 1 LED MR16, 3 Lenses, 1 Clip