VOLT® Ground Hog PVC PAR36 In-Ground Well Light

VOLT® Ground Hog PAR36 Well Light

The most affordable high intensity lighting fixture on the market, the VOLT® Ground Hog Well Light can be installed in turf or mulch beds for an assortment of uplighting applications. It's a perfect substitute for a spotlight when an in-ground fixture is desired. Its low profile design keeps the fixture hidden but results in highly effective lighting.

Features & Benefits:

• 4' 16AWG, SPT-2 pre-stripped lead wire
• Move the lamp up/down and angle the direction of light using the stainless steel adjustable bulb holder (gimbal)
• Reversible design -- use the angled side or flat/flush mount side of the reinforced PVC tube
• Uses a halogen or LED PAR36 lamp up to 35W
• Optional debris cover for bulb protection (only for use with 20W and 35W lamps)
• Requires a low voltage transformer
• UL & cUL Listed
• Lifetime Warranty

NOTES:

1. Open design well lights (and well lights in general) should not be installed in locations where they can become filled or covered by leaves, pine needles or debris. They should be installed in regularly maintained areas to ensure they are free and clear of debris. Failure to do so can result in dangerous overheating, premature lamp or fixture failure and even risk the possibility of a fire.
2. Do not use a debris cover with any halogen lamps over 35 watts or it can cause dangerous overheating. Halogen wattage's above 35 watts in this fixture require the fixture to be open and well maintained to dissipate the heat. With LED PAR 36 heat is no longer an issue.
3. In a professional design, it is rare to need more than 35 watts of illumination; 50 watts and above leads to hot spots from a design perspective and overheating for fixtures. If you need more light than 35 watts, you likely need more fixtures, not more wattage. However, with our LED PAR36, you can now get much more light from a single fixture at a fraction of the cost.